The Ddns Status Screen - ZyXEL Communications UAG2100 User Manual

Table 24 Monitor > System Status > Session Monitor (continued)
LABEL
User
Service
Source
Destination
Search
Active Sessions
Show
User
Service
Source
Destination
Rx
Tx
Duration

7.6 The DDNS Status Screen

The DDNS Status screen shows the status of the UAG's DDNS domain names. Click Monitor >
System Status > DDNS Status to open the following screen.
Chapter 7 Monitor
DESCRIPTION
This field displays when View is set to all sessions. Type the user whose sessions you
want to view. It is not possible to type part of the user name or use wildcards in this field;
you must enter the whole user name.
This field displays when View is set to all sessions. Select the service or service group
whose sessions you want to view. The UAG identifies the service by comparing the protocol
and destination port of each packet to the protocol and port of each services that is
defined. (See Chapter 34 on page 319
This field displays when View is set to all sessions. Type the source IP address whose
sessions you want to view. You cannot include the source port.
This field displays when View is set to all sessions. Type the destination IP address
whose sessions you want to view. You cannot include the destination port.
This button displays when View is set to all sessions. Click this button to update the
information on the screen using the filter criteria in the User, Service, Source Address,
and Destination Address fields.
This is the total number of active sessions that matched the search criteria.
Select the number of active sessions displayed on each page. You can use the arrow keys
on the right to change pages.
This field displays the user in each active session.
If you are looking at the sessions by users (or all sessions) report, click + or - to
display or hide details about a user's sessions.
This field displays the protocol used in each active session.
If you are looking at the sessions by services report, click + or - to display or hide
details about a protocol's sessions.
This field displays the source IP address and port in each active session.
If you are looking at the sessions by source IP report, click + or - to display or hide
details about a source IP address's sessions.
This field displays the destination IP address and port in each active session.
If you are looking at the sessions by destination IP report, click + or - to display or hide
details about a destination IP address's sessions.
This field displays the amount of information received by the source in the active session.
This field displays the amount of information transmitted by the source in the active
session.
This field displays the length of the active session in seconds.
UAG2100 User's Guide
for more information about services.)
77