Table of Contents
Advertisement
9. Projector registration
9.4
Update registration of an existing projector
When should it be used ?
An update of the registration of an existing projector should be done in e.g. one of the following cases:
•
relocation of the projector
•
new owner
•
new contact person
•
and when any of the registered data is changed.
How to update
1. First get a new certificate file. See "Download the certificate file", page 77.
2. Go to Barco's Partnerzone on https://secure.barco.com/digitalcinema/.
3. Login into the partnerzone.
Click Register DC projector and select Update DC projector.
The update page is displayed with your registered projectors.
Image 9-11
Select projector to update
4. Select the projector for which the registration must be updated.
The installation address is displayed in Selection
Click >> Next to continue.
5. Browse to locate the certificate file. Select the file and click Open.
The file is filled out next to XML file. Click >> Next to continue. From now on the procedure is equal to those of the registration
of a new projector. Follow the steps as given in the wizard.
84
R59770242 DP-1200 06/01/2009
Advertisement
Table of Contents
