Table of Contents
Advertisement
10.14 Installation of the lamp cover
Necessary tools
7 mm flat screw driver.
How to install the lamp cover of the projector?
1. Install the lamp cover of the projector doing the following:
a) Bring the lamp cover towards its final position (A),
b) then gently push the locking stud at the left top corner (B) into its receiver,
c) then gently push the locking stud at the left bottom corner (C) into its receiver.
A
Image 10-27
2. Secure the lamp cover by locking the two captive screws at the right side of the lamp cover.
Image 10-28
R59770242 DP-1200 06/01/2009
10. Removal and installation of projector covers
B
C
99
Advertisement
Table of Contents
