Gbic Transceiver Slots - Allied Telesis AT-9408LC/SP Installation Manual

GBIC Transceiver Slots

The AT-9424T/GB switch has two slots on the front panel labeled 23 and
24 for optional fiber optic Gigabit Interface Converter (GBIC) Ethernet
transceivers. GBIC modules can be installed to interconnect devices over
large distances using fiber optic cable.
Figure 9 illustrates a fiber optic GBIC transceiver.
GBIC transceiver slots 23 and 24 are paired with twisted pair ports 23R
and 24R. Only one port or transceiver in a pair can be operational at a time
and that a link on a transceiver port takes priority over a link on a twisted
pair port. For further information, refer to "Redundant Twisted Pair Ports"
on page 26.
Note
For a list of supported GBIC transceivers, contact your Allied
Telesyn sales representative.
AT-9400 Series Layer 2+ Gigabit Ethernet Switches Installation Guide
GBIC Transceiver
Figure 9
23