Compact Flash Card Slot - Allied Telesis AT-9408LC/SP Installation Manual

Chapter 1: Overview

Compact Flash Card Slot

28
The compact flash card slot featured on many of the switches in the
AT-9400 Series and shown in Figure 12 can be used to store configuration
files and AT-S63 management software image files on a compact flash
card. A compact flash memory card can make it easier for you to upgrade
the files on a switch or transfer files between AT-9400 Series switches.
Figure 12
Note
A flash memory card is not required for normal operations of the
switch.
The AT-9400 Series switches support only the AT-CF128A 128MB
compact flash card from Allied Telesyn. Contact your Allied Telesyn sales
representative for more information.
To insert a compact flash card, position it so that the manufacturer's brand
label is facing up and press it into the slot until the button marked "Eject"
pops out.
To remove the compact flash card, press the button marked "Eject" until it
is pressed in completely and then remove the compact flash card.
For information on how to transfer files to and from a flash memory card,
refer to the AT-S63 Management Software User's Guides.
AT-9408LC/S
COMPACT FLASH
EJECT
463
Compact Flash Card Slot
TER
P