Unpacking The Switch - Allied Telesis AT-9408LC/SP Installation Manual

Unpacking the Switch

To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Make sure the following components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
One AT-9400 Series Gigabit Ethernet switch
Two rack-mount brackets
Eight flathead Phillips rack-mount bracket screws
AC power cord (AC switches only; Americas, EU, Australia, and
UK only)
AC power cord retaining clip (AC switches only)
Management cable for local management
Documentation CD
Warranty card
AT-9400 Series Layer 2+ Gigabit Ethernet Switches Installation Guide
43