Changing The Aspect Ratio Of The Projected Image; Changing Methods - Epson EB-G7905U User Manual

Adjusting Projected Images
d
Press the [Menu] button to finish making settings.
Changing the Aspect Ratio of the Projected
Image
You can change the Aspect Ratio
the ratio of height and width, and the resolution of the input signals.
Available aspect modes vary depending on the Screen Type currently set.
a
Set the Screen Type before changing the aspect ratio.
s "Screen Settings"

Changing methods

Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
Aspect Mode
Projects in an appropriate aspect ratio based on
Auto
information from the signal being input.
Normal Projects while retaining the aspect ratio of the input image.
Projects at an aspect ratio of 4:3.
4:3
Projects at an aspect ratio of 16:9.
16:9
g
of the projected image to suit the type,
p.30
Explanation
Aspect Mode
Full Projects at the full size of the projected screen.
Projects by enlarging the input image to the full width of
H-Zoom
the projected screen while retaining the aspect ratio. Areas
that exceed the edges of the projected screen are not
projected.
V-Zoom Projects by enlarging the input image to the full height of
the projected screen while retaining the aspect ratio. Areas
that exceed the edges of the projected screen are not
projected.
Projects to the center of the projected screen at the
Native
resolution of the input image. Areas that exceed the edges
of the projected screen are not projected.
a
• You can also set the aspect ratio from the Configuration menu.
s Signal - Aspect
• If parts of the computer image are missing, set the Resolution
setting to Wide or Normal from the Configuration menu, according
to the resolution of the computer.
s Signal - Resolution
The aspect mode changes as shown in the tables below.
The following colors in screen images in the tables indicate areas that are
not displayed.
: The area where the image is not displayed depending on the screen
type setting.
: The area where the image is not displayed depending on the aspect
mode setting.
EB-G7905U/EB-G7900U/EB-G7500U/EB-G7400U/EB-G7200W/EB-G7000W
Screen type setting: 16:10
Explanation
p.139
p.139
89