Before You Connect The Projector - Epson PowerLite 7300 User Manual

Before You Connect the Projector

Before you start connecting the projector to your equipment, decide
where you will want to place your projector and computer or video
source. The distance between the projector and the screen determines
the actual image size. Place the projector somewhere between 4 and
54.7 feet (1.2 and 16.7 meters) away from the screen; use the general
guidelines in the table below to determine the proper distance. (For
more precise calculations, see "Positioning the Projector" on page 58.)
Caution: Do not hold or lift the projector by the lens. This can damage the
lens.
Image size (diagonal)
200 inches (5.1 m)
100 inches (2.54 m)
80 inches (2.03 m)
60 inches (1.52 m)
40 inches (1.02 m)
30 inches (0.76 m)
23 inches (0.58 m)
Note: You can connect a Kensington MicroSaver
the hole on the projector's right side. Contact your computer dealer.
Horizontal distance from projector to screen
Minimum
324.1 inches (8.2 m)
160.8 inches (4.1 m)
128.1 inches (3.3 m)
95.5 inches (2.4 m)
62.8 inches (1.6 m)
46.5 inches (1.2 m)
35.1 inches (0.9 m)
Before You Connect the Projector
®
anti-theft device in
Maximum
436.5 inches (11.1 m)
217.1 inches (5.5 m)
173.1 inches (4.4 m)
129.2 inches (3.3 m)
85.3 inches (2.2 m)
63.3 inches (1.6 m)
48.0 inches (1.2 m)
15