8
Beeper Indications
When one beep sounds (short high tone) it means data was decoded
successfully. If any other beeps sound, contact the technical person in charge of
scanning.
Troubleshooting
If the scanner does not work after following the operating instructions in this guide:
• check the system power.
• check that scanning is enabled.
• check that the battery is installed correctly.
• check for loose cable connections.
• ensure the Phaser scanner is programmed to read the type of bar code
scanned.
• check the symbol to ensure it is not defaced.
Cleaning
Wipe the scanner window periodically with a lens tissue or other material suitable
for cleaning optical material, such as eyeglasses.
CAUTION
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations
they are sold and are labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly
approved by Symbol Technologies, could void the user's authority to operate the
equipment.
CAUTION
Do NOT attempt to charge damp/wet mobile computers or batteries. All components
must be dry before connecting to an external power source.
Country Approvals
Regulatory markings are applied to the device signifying the device is approved for use
in the following countries: United States, Canada, Australia, Japan and Europe.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country
markings. This is available at http://www2.symbol.com/doc/.
Operation of the device without regulatory approval is illegal.
Do not pour, spray or spill any liquid on the scanner.
Only use Symbol approved and UL Listed accessories, battery packs
and battery chargers.
P360/460 Memory Scanners