I I I .
REAR SHROUD FASTENER
(FASTENER ON OPPOSITE
SIDE NOT SHOWN)
MANUAL FREEWHEEL LEVER
Figure 6. The Quantum 6000 Series Power Base
Electrical Components
The electrical components consist of the controller assembly, the batteries and the motors. The batteries, motors and
controller power module (if equipped) are located on the power base assembly. The controller is located on the seat
assembly. Connectivity between the controller and the motors, batteries and the battery charger is provided by one or
more wiring harnesses. See figure 7.
Controller Cable Connector: The controller cable connector is where the controller plugs into the power base. Each
controller uses a different type of harness. Regardless of which type of controller is used, the harness must be secured to
the seat assembly and not allowed to drag on the floor.
Motor Connectors: This is where the controller connects to the motors.
Battery Connector: This is where the controller connects to the batteries.
18
Y O U R
P O W E R
REAR SEAT MOUNT CONNECTORS
REAR SHROUD
www.pridemobility.com
C H A I R
FRONT SEAT MOUNT
CONNECTORS
FRONT COVER
Quantum 6000 Series