Polycom® KIRK® 6020 Cordless IP Phone
This guide will help you to understand and
operate your new IP Phone. Please print this
guide and keep it handy!
LED
Headset
Connector
Display
Tear Off
Unit
Left
Softkey
Call
Transfer
/Hold
25925 Telegraph Rd., Ste. 210, Southfield, MI 48033 – 1-877-298-4791 – www.bullseyetelecom.com
Turning Handset On/Off
To turn on the handset, press left
softkey.
To turn off the handset, press left
softkey until the question Turn
Off? appears in the display.
Alarm
Button
Confirm with Yes.
Adjusting Speaker Volume
Use the keys placed at the upper
Volume
right side of the handset for
Control
volume control.
Locking/Unlocking Keypad
Press Menu followed by * to lock
or unlock keypad.
Silent Mode On/Off
Right
Press the Menu button followed
Softkey
by the # button to turn the
handset silent mode on/off. In
silent mode the ringer will be
On/Off
muted and the vibrator activated.
Hook
Answering Calls
Press
to answer a call when
your handset rings.
Incoming Call Mute
Four Way
Press Silence to mute the
Navigation
incoming ringer signal.
Key
Reject a Call
Microphone
Press Reject to refuse the call.
Speakerphone On/Off
1. While on a call, press Loud On
to enable speakerphone.
2. To disable speakerphone,
press Loud Off.
Microphone Mute On/Off
1. While on a call, press Mic Mute
to turn microphone mute on.
2. Press Mic On to turn
microphone mute off.
Call Transfer (Blind)
1. While on a call, press R.
2. Press the right-side soft key.
3. Dial the extension or external
phone number.
4. Once it starts ringing, hang up
the phone.
Call Transfer (Consult/Warm)
1. While on a call, press R.
2. Press the right-side soft key.
3. Dial the extension or external
number.
4. Announce to the person that a
call is being transferred.
5. Hang up the phone.
Call Hold
To place an active call on hold,
press R.
Press R again to return to the
call.
Call Waiting
While on a call, press OK to
answer a second incoming
call. The first call will
automatically be put on hold.
To disconnect the active call
and return to the waiting call,
press
To end both calls, press
twice.
Note: To swap between two
calls, press R.
Indicators
External incoming call
Internal incoming call
Missed call
Battery charging
Keypad locked
Microphone muted
Silent mode
Need help?
Do you have a question about the Kirk 6020 and is the answer not in the manual?
Questions and answers