D Status Call - Icom IC-F43GT Instruction Manaul

D Status call

A status message can be sent to the ndvdual or despatcher
staton.
The status message cannot be sent to a group statons.
• Individual status call
q Push [Up]/[Down] to select the desred ndvdual code.
PERSON 1
w Push [Status] to enter the status message selecton
mode.
e Push [Up]/[Down] to select the desred status message
from total of 32 messages (code 0 to 31.)
• The status code 0 and 31 are common message n the system.
Code 0 : Call Back Request
Code 31 : Call Cancel
STATUS 1
r Push [PTT] or [Call Set Up] to transmt the selected status
message to the selected staton.
• "CALLING" s dsplayed.
CALLING
t When the status call s succeeded, "OK" s dsplayed.
OK
• Despatcher status call
q Push [Despatcher] to select the despatcher call condton.
• "DESPATCH" s dsplayed.
DESPATCH
w Push [Despatcher] agan to enter a status message selec-
ton mode.
STATUS 1
e Push [Up]/[Down] to select the desred status message.
• Avalable number of messages and code numbers are the same
as the Indvdual status call as at left.
r Push [PTT] or [Call Set Up] to transmt the selected status
message to the despatcher.
• "CALLING" s dsplayed.
CALLING
t When the status call s succeeded, "OK" s dsplayed.
BASIC OPERATION
OK
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11