Table of Contents
Advertisement
Operation of remote control unit
Loading batteries
1 Remove the cover.
Operation
After plugging the power cord of this unit, press the ON/
STANDBY (
) key of the remote control unit to turn the
system ON. When the system is turned ON, press the key
of the function to be operated.
Press the ON/STANDBY (
(STANDBY). Only the time display will remain lit and
standby status will be reached.
÷ When pressing more than one remote control keys successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
Notes
Notes
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur.
In such a case, change the installation position to avoid malfunction.
2 Insert batteries.
(
(
9
9
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
) key again for OFF
3 Close the cover.
9
(
30°
Model: RC-H90R
Infrared ray system
Operating range (approx.)
17
Controls and indicators
XD-9581MD (En)
2
1
Remote sensor
6 m
30°
Advertisement
Table of Contents
