Kenwood XD-9581MD Instruction Manual page 74

74
Ensure that the unit is OFF (STANDBY).
Check the reservation content
Select the program number to be
checked.
When timer operation is not required
Press so that all PROG. indicators are
OFF.
To set the same timer program again
Press so that the desired PROG. indica-
tors lights.
Note Note
Each press of the key switches the program numbers as follows.
1 PROG.1 ........ Display of program 1
2 PROG.2 ........ Display of program 2
3 Normal mode
EX.BASS
Each press of the key switches the program numbers as follows.
1 PROG.1 ........ Program 1 operates.
2 PROG.2 ........ Program 2 operates.
3 PROG.1, 2 .... Programs 1 and 2 operate.
SRS 3D
4 Not lit .......... No program operates.
Each press of the key switches the program numbers as follows.
1 PROG.1 ........ Program 1 operates.
2 PROG.2 ........ Program 2 operates.
3 PROG.1, 2 .... Programs 1 and 2 operate.
SRS 3D
4 Not lit .......... No program operates.
Adjust the clock before setting the timer.
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
÷ The reserved contents will be displayed for 3 seconds per item.
After this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
÷ The reservation contents are held in memory.
÷ Also prepare the disc or MD and adjust the listening volume.
Timer operation
XD-9581MD (En)