Table of Contents
Advertisement
76
Important items
Maintenance
Maintenance of the Set
When the front panel, the case, etc. becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, alcohol, etc., as these can
cause discoloration.
Reference
Beware of condensation
When water vapor comes into contact with the surface of a cold
material, condensation is produced.
If condensation occurs, correct operation may not be possible, or
the unit may not function correctly.
This is not a malfunction, however, and the unit should be dried-out.
(To do this, turn the ON/STANDBY key ON and leave the unit as it is
for several hours.)
Memory backup function
Stored contents which are
cleared immediately when
power plug is unplugged from
power outlet
Stored contents which are
cleared in at least a day after
power plug is unplugged from
power outlet
Memory contents which are lost
after at least one day with unit
OFF (STANDBY) or the power
plug pulled from the outlet.
WARNING NOTICE:
IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT TO
MAKE COPIES OF TAPES OR DISCS WITHOUT THE PERMISSION
OF THE COPYRIGHT OWNERS. ANYONE WISHING TO COPY COM-
MERCIALLY AVAILABLE TAPES OR DISC SHOULD CONTACT THE
MECHANICAL COPYRIGHT PROTECTION SOCIETY LIMITED OR
THE PERFORMING RIGHTS SOCIETY LIMITED.
Clock display
Amplifier section
ON/STANDBY status (ON or
STANDBY)
Input selection
Volume control value
Balance setting
Equalizer user memory
Tuner/equalizer section
Receiving band
Frequency
Preset stations
Program settings
SRS 3D level
MD recorder section
Display mode
A
Recording level
In regard to contact cleaners
Do not use contact cleaners because it could cause a malfunc-
tion. Be specially careful not to use contact cleaners containing
oil, for they may deform the plastic component.
Be especially careful in the following conditions:
÷ When the unit is brought from a cold place to a warm place, and
there is a large temperature difference.
÷ When a heater starts operating.
÷ When the unit is brought from an air-conditioned place to a place of
high temperature with high humidity.
÷ When there is a large difference between the internal temperature
of the unit and the ambient temperature, or in conditions where
condensation occurs easily.
Sound Retrieval System manufactured under licence from SRS Labs,
Inc. "SOUND RETRIEVAL SYSTEM" and the SRS Symbol
trademarks of SRS Labs, Inc.
Purchase of this product does not convey the right to sell recordings
mode with the SOUND RETRIEVAL SYSTEM.
Note related to transportation and movement
Before transporting or moving this unit, carry out the following
operations.
1. Press the 0 key and remove all CDs and MD.
2. Verify that the display shown appears.
Tuner/equalizer section
PGM MEMO
EDIT
RDS EON
TA NEWS
INFO.
TP
PTY
N O D I s C
AUTO
DISC
ALL
TUNED
STEREO
MAX
SLEEP
O.T.T.
ECHO
P.B.C.
VOL.
MD Recorder Section
N O
D I S C
TITLE
SEARCH
MANU.
3. Wait a few seconds and turn the unit OFF (STANDBY).
When your unit needs to be repaired, bring the entire set
(Speakers excluded) to your dealer.
In case of difficulty
XD-9581MD (En)
are
TOTAL SPACE
PROG.
MUTE
N.B.
12
5
3
4
kHz
2
1
MHz
8
9
10
6
7
11
12
13
14
15
EQ.
MANU.
16
17
18
19
20
ON
MUSIC CALENDAR
TOTAL
DIGITAL
SINGLE
1
2
REMAIN
0 0 0
:
PGM
REPEAT
Advertisement
Table of Contents
