Lexmark XC2130 User Manual page 303

Troubleshooting
Action
Step 6
Check if the printer is connected to an analog phone service or the correct
digital connector.
The fax modem is an analog device. Certain devices can be connected
to the printer so that digital telephone services can be used.
• If you are using an ISDN telephone service, then connect the
printer to an analog telephone port (an R-interface port) on an
ISDN terminal adapter. For more information and to request an R-
interface port, contact your ISDN provider.
•
If you are using DSL, then connect to a DSL filter or router that will
support analog use. For more information, contact your DSL
provider.
• If you are using a PBX telephone service, then make sure you are
connecting to an analog connection on the PBX. If none exists, then
consider installing an analog telephone line for the fax machine.
Is the printer connected to an analog phone service or the correct digital
connector?
Step 7
Check for a dial tone.
Did you hear a dial tone?
Step 8
Temporarily disconnect other equipment (such as answering machines,
computers with modems, or telephone line splitters) between the printer
and the telephone line, and then try sending or receiving a fax.
Can you send or receive a fax?
Step 9
a
Temporarily disable call waiting. Contact your telephone company to
obtain the keypad sequence for temporarily disabling call waiting.
b
Try sending or receiving a fax.
Can you send or receive a fax?
Yes No
Go to step 7. Connect the printer to
an analog phone
service or the correct
digital connector.
Go to step 8.
The problem is solved. Go to step 9.
The problem is solved. Go to step 10.
303
•
Try calling the fax
number to make
sure that it is
working properly.
•
If the telephone
line is being used by
another device,
then wait until the
other device is
finished before
sending a fax.
•
If you are using the
On Hook Dial
feature, then turn
up the volume to
check if you hear a
dial tone.