Lexmark XC2130 User Manual page 147

Understanding the printer menus
Use
Screen Brightness
20–100
One Page Copy
Off
On
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Show Bookmarks
Yes
No
Allow Background Removal
On
Off
Allow Custom Job Scans
On
Off
Scanner Jam Recovery
Job level
Page level
Web Page Refresh Rate
30–300
Contact Name
Location
To
Specify the brightness of the display.
Note: 100 is the factory default setting.
Set copies from the scanner glass to only one page at a time.
Note: Off is the factory default setting.
Set the audio volume for the buttons.
Notes:
•
On is the factory default setting for Button Feedback.
•
5 is the factory default setting for Volume.
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Scan multiple jobs to one file.
Notes:
•
On is the factory default setting.
•
This menu item appears only when a printer hard disk is
installed.
Specify how a scanned job should be reloaded if a paper jam occurs
in the ADF.
Notes:
•
Job level is the factory default setting.
•
If Job level is selected, then the entire job must be rescanned
if any pages jam.
•
If Page level is selected, then rescan from the jammed page
forward.
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 is the factory default setting.
Specify a contact name.
Note: The contact name is stored on the Embedded Web Server.
Specify the location.
Note: The location is stored on the Embedded Web Server.
147