Connect headphone with a stereo mini-plug
BEAT CANCEL switch
0 CD lid
To load or eject a CD, press the area marked 0 push
open on the CD lid to open it.
Turn this knob for volume adjustment.
4 and ¢ multi control keys
In the normal mode, these are used to
– skip CD tracks
– fast forward or rewind tape
– select a preset radio station
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/sound
• Pressing these (multi control keys) switches the dis-
"AUTO PRESET ?" or "AUTO MEMORY ?"
(Only when the TUNER input is selected)
(Only when the AUX input is selected)
"TIME ADJUST ?"
• The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
7 Tuning Mode key
CD, TAPE :
Press to stop a disc or tape operation.
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
Press to display the clock.
Each press switches the mode.
Clock display on
Clock display dimmed
Clock display off
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
Basic operation keys
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key
Press to select the TUNER input.
This key is also used to select the received broadcast
CD 6 key
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE 2 3 key
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
POWER key (For U.S.A. and Canada)
key (For other countries)
Press to set the unit to On or Standby.
Lights up when the unit is set to the Standby mode of
: Ordinary standby.
Green : Timer standby.
: The unit is On.
This window receives signals from the remote control
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
Press to switch the function of the 4 and ¢ keys to
menu select mode. Press again to reset the function of
the 4 and ¢ keys to normal mode.
Press to select EX. BASS or LOUD sound effect or
press to set or enter an item selected with the 4 and
Controls and indicators