Download  Print this page

Program Recording (Cd = Tape) - Kenwood HM-335 Instruction Manual

Kenwood instruction manual micro hi-fi component system hm-335
Hide thumbs

Advertisement

Program recording
Desired CD tracks can be programed in the desired sequence and recorded onto a tape.
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type
) tapes.
Be sure to put the cassette deck in stop mode.
1
Make preparation for recording.
1
Select the CD input.
2
Ensure that the "RDM" indicators are not lit.
3
Perform steps 1 to 3 of the procedure in "Recording on TAPE". §
4
Insert disc in the CD player.
÷ If the "RDM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
2
Program the desired sequence of CD tracks.
Perform steps 1 and 2 of the procedure in "Lis-
tening to the desired sequence (program play-
back)". ª
3
Start recording.
O.T.E.
To interrupt a recording
STOP 7
(Recording and playback will be stopped)
(CD = TAPE)
AUTO/MONO
÷ When the PGM key is pressed to cancel the edited con-
tents, the entire editing contents will be erased.
÷ Tracks programed beyond the available tape recording
time will be interrupted in the middle.
÷ Recording starts from the first track in the program and
ends after having recorded the entire programed
tracks.
÷ Recording stops automatically when the program play-
back of CD has completed.
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
At the end of the recording
Cassette deck
:
Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
Convenient recording methods
º
35
EN

Hide quick links:

Advertisement

loading

  Also See for Kenwood HM-335

  Related Manuals for Kenwood HM-335

This manual is also suitable for:

Rxd-m35