Download  Print this page

Receiving Broadcast Station - Kenwood HM-335 Instruction Manual

Kenwood instruction manual micro hi-fi component system hm-335
Hide thumbs

Advertisement

Receiving broadcast station

Pressing the TUNER/band key while the power is off will turn the power on and start radio reception.
One-by-one presetting (3)
Tuning to a non-
preset radio
station (1)
One-by-one preset-
ting (2,4)
TUNER/band
20
EN
Tuning to a
non-preset
radio station
(2)
1. Select the tuner input.
Each press of the TUNER/band key switches the band as follows.
FM
AM
2. Preset a radio station in memory.
Collective presetting of stations
Follow the procedure in "Collective presetting of stations" to preset auto-
matically the tunable radio stations in your area.
÷ Once the stations are stored by auto presetting, you are not required to
repeat this procedure the next time you listen to radio. However when
you shift to another location whereby the broadcast station frequencies
are different, you will have to re-execute the presetting of stations.
One-by-one presetting (Manual preset) ™
A station can also be tuned even when it is not preset. For details, read
"Tuning to a non-preset radio station (Auto tuning, Manual tuning)".
3. Tuning (Preset Call)
÷ If radio stations have al-
ready been stored with
auto presetting or manu-
al presetting, select a sta-
tion using the 4, ¢
key. Each press of the
same key switches the
preset stations in se-
quence.
When ¢ is pressed : 1=2=3 ... 28=29=30=1...
When 4 is pressed : 30 = 29 = 28 ..... 3 = 2 = 1 = 30.....
÷ When a key is held depressed, preset stations will be skipped at an inter-
val of about 0.5 second.
÷ To select a preset station from the remote, use the 4 P.CALL ¢ key
or numeric keys.
Playback of TAPE
0 push open
Collective presetting
of stations
¡
Frequency display
FM
ST
MHz

Hide quick links:

Advertisement

loading

  Also See for Kenwood HM-335

  Related Manuals for Kenwood HM-335

This manual is also suitable for:

Rxd-m35