Tuning to a non-preset radio station
Select the tuning mode according to the radio
wave receiving condition.
When the receiving condition is good:
When it is poor due to weak radio waves:
Select the AUTO or MANUAL mode.
Tune a station.
Remote control unit only
Perform the procedure in "Tuning to a non-
preset radio station (Auto tuning, Manual
tuning)" to receive the station to be preset.
Press the ENTER key during reception.
(Proceed to step 3 while "MEMORY" is lit.)
Select one of the preset numbers from
1 to 30.
Press the ENTER key again.
(Repeat steps 1, 2, 3 and 4 to preset other sta-
(Auto tuning, Manual tuning)
÷ In MANUAL mode, FM stations are received in mon-
Each press alternates the mode.
1 "AUTO" :
2 "MANUAL" :
÷ Normally, use the AUTO (Auto tuning, stereo reception)
In AUTO mode :
The next preset station can be received automatically
every time the TUNING (1 or ¡) key is pressed.
In MANUAL mode :
Press the TUNING (1 or ¡) key repeatedly until the
desired station is received. The desired station can
also be received by holding the TUNING (1 or ¡)
key depressed until its frequency is displayed.
"MEMORY" lights (for approx. 20 sec.)
÷ A maximum of 30 stations of the band presently be-
ing received will be preset.
÷ If several stations are preset under the same num-
ber, the previous memory is replaced with the latest
Receiving broadcast station
Playback of TAPE