Download  Print this page

Playback Of Tape - Kenwood HM-335 Instruction Manual

Kenwood instruction manual micro hi-fi component system hm-335
Hide thumbs

Advertisement

Playback of TAPE

Pressing the TAPE 2 3 key while the power is off will turn the power on and start tape playback if there
is a tape in the cassette deck.
Selection of TAPE equalizer (TAPE EQ.)
To stop playback
To wind tape
at high speed
0 push open
TAPE
18
EN
Start playback
1. Load a cassette tape.
1
Press the area marked 0 push open to open the cassette holder.
2
Insert a tape.
3
Press the area marked 0 push open to close the cassette holder.
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting off tape.
÷ The tape deck of the unit can play Normal (Type ) tapes.
÷ When there is a tape slack, wind the tape before loading.
2. Start playback.
Press the TAPE 2 3 key.
Transport direction indicators:
Indicates the tape transport direction during playback or recording by lighting
of 2 or 3. This direction is the direction stored in memory when the tape was
last stopped.
To wind tape at high speed
Transport direction
indicators
Playback of TAPE
Start playback
To stop playback
0 push open
r
Reverse mode
indication
Tape counter

Hide quick links:

Advertisement

loading

  Also See for Kenwood HM-335

  Related Manuals for Kenwood HM-335

This manual is also suitable for:

Rxd-m35