HIKVISION NETWORK CAMERA User Manual page 51

User Manual of Network Camera
Input the new IP address, subnet mask, and port number, and click 'save' button. If a dialog pops up, showing
'saved successfully', that means you have modified the configuration information; if 'saving failed' dialog pops
up, click the 'cancel' button to quit it.
4. Recovering default password
You can reset the password of the super user as '12345' in the case of a lost password.
Input certain validation code into the 'Resume default password' box, and click 'OK' to finish the
administrator's password initiating.
Note: Password reset code can be obtained by the technicians from Hikvision after you provide the device
Serial NO.
45
45