HIKVISION NETWORK CAMERA User Manual page 17

User Manual of Network Camera
transparent cover shown as below:
2. Use the screws to fix the dome camera on the ceiling.
3. Adjust the camera's view angle while watching the video on the adjustment monitor.
Loosen the fixed screws, and adjust horizontally and vertically the camera pan and tilt. Adjust the lens focus to
get optimal video effect.
4. Tighten the screw after adjusting camera's view angle, and cover the transparent casing.
Fig. 2.2.8 Unload the Cover
Fig. 2.2.9 Install the Camera
11
11