Cleaning and care
If the milk pipe is blocked, clean it
under running water with the brush
supplied:
^ Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
^ Fit the dispensing unit back together.
^ Push the dispensing unit back onto
the main dispenser. Press firmly to
ensure the spouts at the bottom
connect correctly with the edge of
the dispenser.
^ Replace the stainless steel cover and
connect the milk pipe if applicable.
48
Milk container
The milk container should be taken
apart and cleaned every day.
^ Clean all parts by hand only using
warm water and liquid dish soap.
Use the cleaning brush supplied to
remove milk residue from the milk
pipework if necessary.
^ Rinse all parts carefully under
running water. Residual dish soap
can affect the taste of milk from the
machine and the quality of the milk
froth. Dry all parts afterwards.
^ Reassemble the milk container.