Frequently Asked Questions
Fault
F73
or
"Check the brew
unit"
60
Possible cause and solution
The brew unit cannot be positioned correctly.
^ Turn the machine off with the On/Off K button.
^ Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see diagram).
^ Do not insert the brew unit. Close the appliance door and
turn the machine on with the On/Off - sensor.
This will initialize the brew unit motor and put in back into the
start position.
^ When "Insert the brew unit" appears in the display, open
the appliance door and put the brew unit back in the
machine.
Then close the door.