Nautique Configurable Running Surface (Ncrs) - G21, G23 And G25 - CORRECT CRAFT G21 Owner's Manual

V-Drive Sec 3_2015.qxp_Naut Air Sec 4.qxd 6/27/14 1:54 PM Page 3-66
Section 3
Nautique Configurable
Running Surface (NCRS) -
G21, G23 and G25
The Nautique Configurable Running Surface (NCRS) system is an
active vessel control system that uses the Nautique Hydro-Plate to
change the attitude or running angle of the boat based on user
setting, ballast levels, and dynamic conditions. By controlling the
boat's attitude, the NCRS system aids in planing, helps keep the
boat on plane in tight turns, and reduces bow rise for improved
visibility. NCRS also functions as a wake shaping device. By varying
the NCRS Set Point from 0 to 5, the user can transform the wake
from a rounded mellow ramp to a pro level lip in seconds.
The NCRS system has two different modes: Auto Deploy Mode and
NCRS Set Point Mode. In Auto Deploy Mode, the Hydro-Plate
moves to NCRS Auto Deploy Position Target Percentages based on
NCRS Intensity setting, ballast levels, and dynamic conditions. The
target values are only active if NCRS Auto Deploy is set to ON. In
NCRS Set Point Mode, the Hydro-Plate moves to a predetermined
position based on the NCRS Set Point. When Auto Deploy is on, the
NCRS system transitions from Auto Deploy Mode to NCRS Set
Point Mode automatically based on GPS Speed. When Auto Deploy
is off, the NCRS system remains in NCRS Set Point Mode.
The user has three Settings he or she can use to interact with the
NCRS system, along with Speed Control On/Off which also affects
the NCRS control. For most effective NCRS response, toggle Speed
Control to ON. The user should ask these three questions to decide
how to set the NCRS:
3-66