•
Provides serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, see
•
Provides USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, see
•
Charges the MC9190-G's battery, when used with the appropriate power supply.
Attaching and Removing
To attach, snap the CAM onto the bottom of the MC9190-G.
Attaching the CAM
Figure 2-23
To remove, squeeze the latch grips and pull the CAM from the MC9190-G.
NOTE Remove the CAM from the bottom of the MC9190-G before using a cradle for charging and
communication.
Setup
AC Power
Supply
CAM Power Connection
Figure 2-24
Latch Grip
(one on each side)
Into Cigarette
OR
Vehicle Power
Supply
Serial Communication Setup on page
Serial Communication Setup on page
Lighter
Accessories 2 - 25
2-34.
2-34.