Create A New Modem Connection; Edit An Existing Modem Connection - Motorola MC9190-G Integrator Manual

B - 16 MC9190-G Integrator Guide
Select a file name in the list.
5.
Tap
6. OK
The selected application appears in the text box.
• Connect using - Lists all modem connections that have been defined.
If you check the General settings options to
have an opportunity to select the appropriate modem connection when you place the MC9190-G in the cradle.
If you do not check the above options, iDockIt uses the last modem connection you selected.
Tap to create a new modem connection.
New
Tap to change the settings of an existing modem connection.
Edit
Tap to delete the currently displayed modem connection.
Delete

Create A New Modem Connection

Get the following information from your ISP or network administrator: dial-up access telephone number, user
1.
name, password, domain name, and TCP/IP settings.
Tap below the
2. New
In the Connection Properties dialog, enter a name for the connection.
3.
In the Modem list, tap your modem type. For the modem cradle, tap
4.
Tap
5. Configure
requirements for your modem.
Tap after entering the connection name and choosing a modem.
6. Next
Enter the access phone number and then tap
7.
Enter Login information (user name, password, and domain name) and then tap
8.
You should not need to change any TCP/IP settings unless directed by your ISP or network administrator. Tap
9.
and then tap
Next
The new modem connection is in the drop-down list.

Edit An Existing Modem Connection

In the
1. Connect using
Tap .
2. Edit
In the Connection Properties dialog, make any necessary changes to the connection name, modem, or modem
3.
configuration options. Tap
If you continue, you can change the access phone number. Tap
4.
If you continue, you can change your login information. If you need to make any TCP IP setting changes, tap
5.
. Otherwise, tap
Next
at the top of the screen.
Display settings when cradled
list.
Connect using
and change any Port Settings or Call Options in the Device Properties dialog, depending on
in the next server address dialog.
Finish
list, select the modem connection you need to modify.
to continue or
Next
to close the dialog.
OK
and
Hayes Compatible on COM1
.
Next
to close the dialog.
OK
to continue or
Next
Auto-connect after x seconds
.
.
Next
to close the dialog.
OK
, you