Wake Up On Motion; Setting Sensitivity; Display Tab - Motorola MC9190-G Integrator Manual

7 - 4 MC9190-G Integrator Guide

Wake Up on Motion

The Wake Up on Motion section provides configurable options for waking the MC9190-G from suspend mode by
shaking the MC9190-G.
Select Inactivity checkbox to allow IST to wake the MC9190-G when it was suspended due to inactivity.
Use the Change Sensitivity... button to configure the sensitivity settings.

Setting Sensitivity

Use the slider to set the sensitivity. A low setting indicates that a harder shake (faster movement) is required for the
IST to initiate a wake up action. The sensitivity can be set from "0" to "10" and when the sensitivity is set to lower
values a simple shake/motion can be detected by IST. A high setting allows IST to issue a wake up action when an
easier movement to the MC9190-G is detected. Shake the MC9190-G to test the set sensitivity. An audio sound is
heard and a message is displayed on screen when the shaking level reaches the set sensitivity level.
Set IST Sensitivity Window
Figure 7-4

Display Tab

Use the Display tab configure display interaction settings.
Display Tab
Figure 7-5
The Auto Orientation parameter controls the display rotation according to the MC9190-G orientation. Select the
Auto Orientation checkbox to enable this feature. Auto orientation is disabled by default.