Attaching the hand-strap
The HC700-G has an adjustable hand-strap which enables to
hold the unit for extended periods and provide ease of use.
The strap is made of flexible material with Velcro attachment
patches.
To attach the hand-strap to the back of the HC700-G:
1. Turn the HC700-G to view the back side.
2. Insert the U shaped clip of the strap into the holes on the
imager housing.
3. Attach the end of the strap through the cavity located
next to cradle interface connector.
Hand-strap
Figure 6. Attaching the hand-strap
U shaped clip
Hole
Buckle
9