Motorola MC9190-G Integrator Manual page 94

5 - 14 MC9190-G Integrator Guide
To find the probable cause of the error, use the error number and/or the error text displayed on the screen to look
up the error in Table
Bootloader Errors
Table 5-1
Error Text
Unknown error
Cancelled by user
Can't open the source
Can't open the
destination
Can't read from the
source device
Can't write to the
destination device
Transmission
checksum error
Readback checksum
error
There is no more heap
space available
Invalid data in verify file -19
Insufficient memory for
buffering data
Insufficient data
available to complete
record
Invalid Symbol HEX file -23
Unrecognized or
unsupported HEX
record
5-1.
Error
Number
-1 A general error occurred. Retry the download. If the failure persists, it is most
likely due to a hardware failure; the MC9190-G requires servicing.
-2 The user cancelled the download.
-7 An error occurred opening the source device (either USB or SDMMC). Check
source device connectivity and retry.
-8 An error occurred opening the destination device (either NAND, RAM, Power
Micro, IST, Keyboard Controller or CPLD). Retry the download. If the failure
persists, it is most likely due to a hardware failure; the MC9190-G requires
servicing.
-9 The source device (either USB or SDMMC) could not be read from. Check
source device connectivity and retry.
-10 The destination device (either NAND, RAM, Power Micro, IST, Keyboard
Controller or CPLD) could not be written to. Retry the download. If the failure
persists, it is most likely due to a hardware failure; the MC9190-G requires
servicing.
-11 An error occurred during transmission from the source device (either USB or
SDMMC) and the checksum check failed. Check source device connectivity
and retry.
-12 A checksum, generated from reading back data that was written to the
destination device, was incorrect. An error during transmission or a write
error to the destination device could cause this.
-14 There is no more heap space available for the download procedure. Restart
Bootloader and retry the download. If the failure persists, contact service with
details of what is being downloaded.
The file contains invalid data. Check that the file is suitable for downloading
on this terminal.
-20 There is no more heap space available for the download procedure. Restart
Bootloader and retry the download. If the failure persists, contact service with
details of what is being downloaded.
-21 A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
-24 The HEX file being downloaded contains an invalid or unrecognized HEX
record. Ensure the file is in proper HEX file format.
Probable Cause