Motorola MC9190-G Integrator Manual page 92

5 - 12 MC9190-G Integrator Guide
Select required operation
Download from SD card
Download from USB
Exit
Bootloader Screen
Figure 5-8
CAUTION To ensure a successful download, do not remove power from the MC9190-G while in Bootloader.
Place the MC9190-G into a Single Slot Serial/USB Cradle.
8.
Use the up and down scroll buttons to select Download from USB, then press ENTER.
9.
The Bootloader displays the following:
10.
Waiting for input. . .
Waiting for Input
Figure 5-9
On the WCE USBDownload application, locate the hex files to download.
11.
NOTE One hex file or multiple hex files can be selected. To select multiple files, press the Ctrl key while selecting
files.
If selecting multiple files to download, USBDownload reads the header of the file and identifies the file type. If
the Partition table file is among the files selected, then USBDownload downloads that file first. Similarly,
USBDownload downloads the CPLD file last.