Hot Microphone Feature
If the Hot Microphone feature was programmed into your MTM800
Enhanced by your Service Provider, you can make an Emergency
Group Call and talk to the dispatcher (and members of your group)
without the need to press and hold the PTT.
The microphone will stay open for a time period (programmed by
your Service Provider). The microphone will stay open until:
•
the Hot microphone time period expires
•
you press PTT during the Hot Microphone period
•
you press the End key
At the end of the Hot Microphone the Emgcy Mic Ended message
will be displayed and the MTM800 Enhanced returns to the
Emergency Mode. The Hot Microphone feature is disabled and PTT
operation returns to normal.
If required you can resume Hot Microphone by pressing the
Emergency button again.
Making an Emergency Group Call
• Hot Microphone enabled - to initiate an Emergency Group Call,
press and hold Emergency Button.
• Hot Microphone disabled - to initiate an Emergency Group Call,
press and hold Emergency Button. When the display has
changed to Emergency Group Call hold PTT and wait for talk
permit tone (if configured) and talk. Release the PTT to be able to
listen.
Messages
Sending a Status Message
Select the desired group, then press the Menu button and select
Messages > Send Status. Select status and press
Sending a New Message
Press the Menu button and select Messages > New Message.
Write your message. Select Send, or press
or PTT.
or PTT. Select your
33