Adjusting The Audio; Setup Of Input Level - Kenwood KRF-V7771D Instruction Manual

Adjusting the audio

Setup of Input Level

30
If the CLIP INDICATOR on the front panel
lights, change the "Input Level" setup.
CLIP INDICATOR
1
Select the icon of the input for which you want to set the input level.
Main
Menu
Phono
TV1 TV2 Video1
2
Open the "Setup" menu and select "Input" icon.
Main
Menu
Phono
1
TV1 TV2 Video1
Lstn Mode Snd Fnc S t p
Lsn Snd
Surround
IR
Download
Back Li g ht
3
Set the "Input Level".
Setu p In p ut
Analog In p ut Level
MD/Ta p e1
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
CD1 CD2 Tuner
Remote
Macro
Mode
Video2 Video3 Video4 AV AUX
MD/ CD2/ Input
Input
Tape1 Tape2 Digital Analog
CD1 CD2 Tuner
Remote
Macro
Mode
Video2 Video3 Video4 AV AUX
Fnc S e t u p
Input
Macro
-6dB
When in the 6ch input mode, adjust the input level with
the source component.
÷ When adjusting "CD1", "Video2", "Video3", "Video4", select
the "Input Analog" icon from the segment screen for analog
input, and then go to step 2.
1 Select the "Main Menu" icon.
2 Select the "Stp" icon.
2
3
3 Select the "Input" icon.
÷ The input level from the input selected in step 1 can be selected
from "0 dB", "–3 dB" and "–6 dB".
Each selection operation of the "Input Level" icon switches it.
If the CLIP INDICATOR lights up, set the level of the selected input
to "–3 dB" or "–6 dB".
÷ This setting is possible only for analog input.
KRF-V7771D (En/T)