Setup For Macro Play (Automatic Operation); Setting Up The Remote Control Unit For Macro Play (Automatic Operation) - Kenwood KRF-V7771D Instruction Manual

Setup for macro play (automatic operation)

Setting up the remote control unit for macro play (automatic operation)

24
General setup flow
1 Open the "Setup" menu and select "Macro"
icon.
2 Select the input to control.
3 Selection in the "Macro Edit: Custom 1" screen
4 6 Setting the target component in the "Edit"
menu
1
Open the "Setup" menu and select "Macro" icon.
Main
Menu
Phono
1
TV1 TV2 Video1
Lstn Mode Snd Fnc S t p
Lsn Snd
Surround
IR
Download
Back Li g ht
2
Select the input to contol.
Three kinds of macros, "Custom 1", "Custom 2" and
"Custom 3" can be set and registered.
Custom1 Cstm2 Cstm3
Video1
Input
selector
Example when the VCR is assigned to "Video1".
3
Perform operation in the "Macro Edit: Custom 1" screen.
Macro Edit:Custom 1
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
CD1 CD2 Tuner
Remote
Macro
Mode
Video2 Video3 Video4 AV AUX
Fnc S e t u p
Input
Macro
1
VCR
component
Edit
2
Device
VCR
TV
The macro play function allows you to set the remote to
control several components in succession. After completing
this setup, you can perform a series of operations automati-
cally. Enter the setup codes for the components you want to
control beforehand.
1 Select the "Main Menu" icon.
2 Select the "Stp" icon.
2
3 Select the "Macro" icon.
3
1 Select the input to be played with the
Each selection of the icon switches the inputs as follows.
= VIDEO1 += VIDEO2 += VIDEO3 += VIDEO4 +=CD1
+= MD/Tape1 +
2 Select the "Edit" icon.
÷ The Edit menu is not displayed if none of the connected compo-
nents has been assigned to Video1.
To set the timing of the component selected in step 2 above,
select the icon corresponding to the component.
÷ Device
÷ TV
: Open the menu screen to set up the connected
devices (components).
: Open the menu screen for the TV setup.
KRF-V7771D (En/T)
or icon.