Table of Contents
Advertisement
4070VR/1080VA [En/K)
Connecting audio components
Make connections as shown below.
When connecting the related system components, be sure
to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
Microcomputer malfunction
If operation is not possible or an erroneous display appears, even
though all connections have been made property, reset the
microcomputer referring to "In case of difficulty".
— 148)
6CH input (M.INPUT)
(1070VR only}
AUX.6CH.INPUT
SYSTEM CONTROL jacks
For
SYSTEM
CONTROL
connections
to
KENWOOD components
-Gn
SYSTEM CONTROL
cord
GLB 0s)
©
SL 16 X58
SYSTEM CONTROL
—
switch
The sound input to AUX.6CH.INPUT
is paired with the video signal input
to VIDEO 2.
210) (2.
Graphic equalizer
-2D
—
|
&
Record player
Caution regarding placement
(except for U.S.A. and Canada)
To maintain proper ventilation, be sure to
leave a space around the unit (from the
Jargest outer dimensions, including pro-
jections) equal to, or greater than shown
below:
Left and right panels. 10 ci, Rear panel. 10
cm, Top panel: 50 cm
7 Cassette deck or
MD recorder
CD player
1. Connect all cords firmly. Loose connections may prevent proper sound transmission or produce noise
ia 2. Be sure to rernove the power cord form Wie AC vullet befure pluygiry ur unplugging any vonnection cords. Plugging / unplugging connection
Notes)
cords without disconnecting the power cord can cause malfunctions and may damage the unit.
3. Do not connect power cords from components whose power consumption is larger than what is indicated on the AC outlet at the rear of
this unit.
Advertisement
Table of Contents
