Setup Of Components Which Are Not Listed In The Setup Codes Chart (Futureset) - Kenwood KRF-V7771D Instruction Manual

Setup of components which are not listed in the Setup Codes chart
20
This service will be available until 31 March 2001.
If your connected components are not listed in the Setup Codes chart, its' setup codes can be downloaded through a telephone
line.
1
Write down the brand name and model number of your component in the space provided before
your call.
Type Brand
TV KENWOOD
1
2
2
Call our Free-Phone Consumer Help-Line and explain which components you would like to add to
your remote control.
UK (including N. Ireland) : 0800-898520
÷ This number is designed specifically for "Futureset Upgrade",
questions about system operation should be first addressed to
your place of purchase.
÷ The hours for customer service are:
Monday-Friday
Saturday
3
Open the "Setup" menu and select the "Download" icon.
Main
Menu
1
Phono
TV1 TV2
Lstn Mode Snd Fnc S t p
Lsn Snd
Surround
IR
Download
3
Back Li g ht
4
Select the "Download" icon.
Futureset U pg rade
5
Receive the setup codes through the telephone.
Model No. Remote Model No.
KV-???? RC-????
9:00 am - 7:00 pm
9:00 am - 3:00 pm
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
CD1 CD2 Tuner
Remote
Macro
Mode
Video1 Video2 Video3 Video4 AV AUX
Fnc S e t u p
Input
Macro
Download
Loadin g
Type Brand
3
4
5
÷ After our customer service representative records the brand name
and model number of your component, he/she will ask you to hold the
remote to the speaker portion of your telephone as shown below.
Your remote control is KENWOOD model number: RC-R0807
Complete steps 3 and 4 before holding the remote to the
speaker portion of your telephone.
1 Select the "Main Menu" icon.
2 Select the "Stp" icon.
2
3 Select the "Download" icon.
÷ "Loading" is displayed during readout of the remote control
codes.
÷ The backlight is turned off during "Loading".
÷ To cancel downloading in the middle, select the CONFIRM key for
more than 2 seconds. As "Canceled" appears, select the
icon to exit the operation.
Place the receiver speaker of the telephone set on the coil
section of the remote control (as shown in the illustration on the
left).
÷ The operator supplys each setup code number. Should you ever
need to change your input configuration, this number can be used.
Please record for your future reference.
÷ After reception, the "Loading" message changes to the "Done"
message, which is shown for a few seconds.
Setup for controlling AV components
KRF-V7771D (En/T)
(Futureset)
Model No. Remote Model No.