Convenient Features - Kenwood KRF-V7771D Instruction Manual

Convenient features

Midnight mode 1/ 2/ Off
(Dolby Digital (AC-3) mode only)
When watching movies at night you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified parts of the AC-3 sound track (like scenes with sudden increases in volume) to minimize the difference
in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low
volumes.
Lsn Sound
Loudness
Tone
SP Level
FL Dimmer, FL Display
Main
Menu
Phono CD1 CD2
1
TV1 TV2 Video1 Video2 Video3
Lstn Mode Snd Fnc S t p
Lsn Snd Function S t p
FL Dis p la y Mode
FL Dimmer
Back light
Main
Menu
Phono CD1 CD2
1
TV1 TV2 Video1 Video2 Video3
Lstn Mode Snd Fnc S t p
Lsn Snd Fnc
Surround
IR
Download
Back Li g ht
3
Fnc S t p
Off
12
Off
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Tuner
Remote
Macro
Mode
Video4 AV AUX
2
3
3
= Connected component
analog/digital display
(Example)
DVD DGTL
(VIDEO4 DGTL)*1
(DVD 6ch )*2
*1 : when the connected component name is not assigned
*2 : when the DVD player is assigned to VIDEO 4, and the selector (VIDEO 4) is set to analog 6ch input mode.
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Tuner
Remote
Macro
Mode
Video4
AV AUX
2
S e t u p
Input
Macro
1 Select the midnight mark icon.
2 Adjust the parameter using the midnight mark icon.
= 1 = 2 = Off =
÷ Some Dolby Digital (AC-3) software may not be compatible with the
Midnight mode.
÷ Midnight mode has no effect on parts of the sound track that are not
specified for compression.
1 Select the "Main Menu" icon.
2 Select the "Fnc" icon to display the "Function" menu shown.
FL dimmer setting :
3 Select the "FL Dimmer" icon.
÷ The display tube brightness changes every time the icon is selected.
FL display mode setting :
3 Select the "FL Display Mode" icon.
÷ The display mode changes every time the icon is selected.
= Input and connected
component name display
(Example)
(VIDEO4 : DVD)
(VIDEO4 : DVD)*1
(VIDEO4 : DVD )*2
This function turns the remote control display illumination on and off.
1 Select the "Main Menu" icon.
2 Select the "Stp" icon.
3 Select the "Back Light" icon.
÷ The illumination is turned on and off alternately every time the icon is
selected.
÷ To save the battery power, it is recommended to keep the Back Light off
in normal use.
KRF-V7771D (En/T)
= Listen mode display=
(Example)
DOLBY DIGITAL
( 6ch INPUT )*2
51