Macro Execute - Kenwood KRF-V7771D Instruction Manual

Macro Execute

26
By setting up the items in "Setting up the remote control
unit for macro play (automatic operation)", you can start
automatic play using the macro function.
1
Select the "Macro" icon .
Main
Menu
Phono CD1 CD2
TV1 TV2 Video1 Video2 Video3
2
Execute a macro in the "Macro Execute" menu screen.
Macro Execute
Video On
Video Off
Audio On
Audio Off
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Tuner
Remote
Macro
Mode
Video4 AV AUX
Macro
Custom1
Custom2
Custom3
Setup for macro play (automatic operation)
Select the icon of the component to be controlled.
Video On : Turns the video component's power ON . The receiver's
power will be turned on at the same time.
TV's power will be turned ON and OFF alternately
everytime "Video On" icon is selected.
Video Off : Turns the video compontnet's power OFF.
receiver's power will be turned off at the same time.
TV's power stays the same although "Video Off" icon
is selected.
Audio On : Select to turn on the audio components.(In the case of
system connection)
Audio Off : Select to turn off the audio components.(In the case of
system connection)
Custom 1 : Select to execute "Macro Custom 1".
Custom 2 : Select to execute "Macro Custom 2".
Custom 3 : Select to execute "Macro Custom 3".
÷ May not operate normally depending on the video signals of the
connected components.
KRF-V7771D (En/T)
The