Kenwood KRF-V7771D Instruction Manual page 50

50
Copying tape (TAPE1 = TAPE2)
Main
Menu
Phono CD1 CD2 Tuner
TV1 TV2 Video1 Video2 Video3
Note on CD2/ Tape2 (Monitor)
The functions described below are available only when the analog input/output are used. If the "CD2/Tape2" icon in the
segment screen is selected during playback of a digital input, the input is switched to the analog input and noise may be
generated.
Using "CD2/Tape2"
The CD2/TAPE2 MONITOR input jacks of the receiver accept a
cassette deck or graphic equalizer.
When a 3-head cassette deck is connected to the CD2/TAPE2
MONITOR input jacks, the recorded audio can be monitored during
recording, and turning "CD2/Tape2" on and off allows you to com-
pare the source audio and recorded audio. Refer to the instruction
manuals of the connected components for their operating proce-
dures.
The "CD2/Tape2 (Monitor)" function is not available during playback
of a digital input and also playback in 6ch input mode. Selecting "CD2/
Tape2 (Monitor)" during digital input playback switches the input to
the analog input.
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Remote
Macro
Mode
Video4 AV AUX
1 Select the "MD/Tape1" input.
2 Start playback of the cassette deck connected to the MD/TAPE1
input jacks, then start recording of that connected to the CD2/
TAPE2 MONITOR input jacks.
Icon in the segment
screen of the remote
CD2/
Tape2
Recording
KRF-V7771D (En/T)
Display on the receiver
CD2 / TAPE2
MONITOR