Storing Rds Stations Automatically In Preset Memory (Auto Memory); Receiving A Preset Rds Station - Kenwood KRF-V7771D Instruction Manual

Storing RDS stations automatically in preset memory
38
(Auto Memory)
RDS stations should be stored in memory before listening to them. Use the following procedure to carry out automatic
presetting. Up to 40 RDS stations can be preset.
1
Select the "Tuner" input and set the band to FM.
Main
Menu
Phono CD1
TV1 TV2 Video1
Tuner
Freq.
FM 108.00MHz
Auto Band
RDS Direct
2
Preset stations by performing the Auto Memory operation.
Memor y /10ke y Pad
Auto Memor y

Receiving a preset RDS station

1. Preset -Call
Tuner
PS
BBC 1 FM
Auto Band
RDS Direct
2. Specifying the preset number
Memor y /10ke y Pad
Auto Memor y
1
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
CD2 Tuner
Remote
Macro
Mode
Video2 Video3 Video4 AV AUX
P.Call
11ch
Memor y /
10ke y Pad
3
2
Memor y 1 2 3
1-ch
4 5 6
7 8 9
0 +10
1
P.Call
16ch
Memor y /
10ke y Pad
Memor y 1 2 3
11ch
4 5 6
7 8 9
0 +10
1 Select the "Tuner" icon.
÷ The last tuned frequency is displayed.
2 Set the receiving band to "FM".
The band is alternated every time "Band" is selected.
FM += AM
Let the FM indicator on the receiver lights up.
3 Select the "Memory/10 key Pad" icon.
1 Select the "Auto Memory" icon.
In a few minutes, the stations with which RDS broadcast is
received are stored in order beginning from preset channels "01"
(up to 40 stations can be preset).
When the number of stations providing RDS broadcasting is less
than 40, some of other FM stations will be preset in the vacant
channels.
÷ During the "Auto Memory" operation, the corresponding indica-
tor on the receiver blinks.
÷ If stations have already been stored in preset channels, the same
number of these preset channels as the number of stations are
cleared and replaced with the data of the newly preset stations.
Select " "or " " icon of "P.Call" to select a preset number.
It can also be selected using numeric icons.
To specify the preset number (up to 40) of the desired station:
Select numeric icons as follows...
To receive in "15" ..... 05
To receive in "20" ..... 00)
÷ If you made a mistake in entering the figure of 10, select the 0
icon repeatedly until the original display is shown, then enter the
correct number.
RDS (Radio Data System)
KRF-V7771D (En/T)