Audio Adjustment - Kenwood KRX-792 Instruction Manual

Table of Contents

Advertisement

Audio adjustment
TONE CONTROL knobs
VOLUME CONTROL knob
L)
O9OOOOOO0O008
m@ Adjusting the volume
(55) (53) (3)
(5
Turn the VOLUME CONTROL knob.
PHONES jack
BALANCE control knob
M
Listening through headphones
1
Insert
the
headphone
plug
into
the
headphones jack.
Main unit
Remote control unit
PHONES
@ When adjusting the volume with the remote control unit,
the VOLUME
CONTROL
knob on the main unit rotates
while you press the key on the remote control unit.
2
Adjusting the left and right volume balance
L BALANCE
R
Wa
To decrease right speaker
C)
To decrease left speaker
volume
re)
6
volume
e@ Set the amplifier's SPEAKERS switch to OFF.
2
Adjust the volume.
@
Adjusting the tone
SPEAKERS
To
~10
10+
To
To
-10
10+
To
decrease
increase
decrease
Fe cpaats
Each press switches the speakers ON or OFF.
Normally leave the speakers switched ON. In this position sound is
output from the connected speakers. During private listening using
headphones, switch the speakers OFF.
@
To mute the sound temporarily
Automatic play operation function associated with
Press the MUTE key.
input selector keys of amplifier
The automatic play operation allows to start playing the selected
input source by simply pressing the input selector key (TAPE A,
TAPE B, TUNER, CD or PHONO).
It also allows to select a correct
input selector key on the amplifier by simply starting playback on the
desired input source component.
The same operation is also possible with the input selector keys on
Remote control only
the remote control unit.
The input source selected at the moment the power is switched ON
is the last source (TUNER, CD, etc.) selected before switching the
@ Pressing the key again resumes the previous volume.
power OFF.
14
krx-792 (En)

Advertisement

Table of Contents
loading

Table of Contents