Select The Speakers; Listening Through Headphones - Kenwood KRF-V7771D Instruction Manual

28

Select the speakers

Main unit
SPEAKERS

Listening through headphones

1 Plug headphones.
PHONES
2 Adjust the volume.
Main unit
VOLUME
DOWN
To decrease To increase
volume volume
Muting audio temporarily
Main unit
MUTE
To cancel muting
Press the MUTE key again or adjust the volume.
Switching the display mode (DISPLAY MODE key)
Main unit
DISPLAY MODE
A ON ( indicator A lights up )
B ON ( indicator B lights up )
A
A + B ON ( Both indicators light up ) : Listening in both SPEAKERS A and SPEAKERS B
A + B OFF ( Both indicators are off )
B
÷ If the VIDEO 4 input has been set to 6ch input, and the input is selected, the speakers A
system will be on automatically. Speakers B system cannot be selected in this case.
RC
To increase
volume
VOLUME
UP
To decrease
volume
RC
MUTE
Press the DISPLAY MODE key.
Each press switches the mode as follows.
= Connected component
analog/digital display
(Example)
DVD DGTL
(VIDEO4 DGTL)*1
(DVD 6ch )*2
*1 : when the connected component name is not assigned
*2 : when the DVD player is assigned to VIDEO 4, and the selector (VIDEO 4) is set to analog 6ch input mode.
: Listening in SPEAKERS A
: Listening in SPEAKERS B
: Muting all speakers
÷ To listen to a Dolby Digital (AC-3) or MPEG source through
headphones, play it in stereo by selecting the "Stereo" icon in the
"Lstn Mode" menu screen or switch the speakers off.
= Input and connected
component name display
(Example)
(VIDEO4 : DVD)
(VIDEO4 : DVD)*1
(VIDEO4 : DVD )*2
Playing music
KRF-V7771D (En/T)
Blinks.
MUTE MUTE
= Listen mode display=
(Example)
DOLBY DIGITAL
( 6ch INPUT )*2