Digital Connections - Kenwood KRF-V7771D Instruction Manual

Digital connections

8
The DIGITAL IN jacks can accept either MPEG, Dolby Digital
(AC-3) or PCM (CD Format) signals (the input signal type is
detected automatically).
The connected components shown here are given as ex-
amples because the available models may vary depending
on marketing areas.
Make connections as shown below.
When connecting the related system components, refer
also to the instruction manuals of the related compo-
nents.
Do not plug in the power lead until all connections are
completed.
LASER DISC RF DEMODULATOR (DEM-9991D)
Note : Only required if you wish to play Laser Discs
DIGITAL OUT
(COAXIAL)
VIDEO 2 VIDEO 3 VIDEO 4 CD 1
COAXIAL COAXIAL OPTICAL OPTICAL
NITOR
DIGITAL IN
OUT
VIDEO 4
DEO 3
Connection of an LD player
When connecting an LD player with AC-3 RF OUT, the LD
player needs to be connected to the RF demodulator (DEM-
9991D) first.
1 Connect the LD player to the KENWOOD LASER DISC RF DE-
MODULATOR (DEM-9991D : optional).
÷ If your LD player can be connected to the receiver directly, connect it
to the DIGITAL IN, VIDEO 3 COAXIAL.
2 Connect the demodulator to the receiver's DIGITAL IN, VIDEO 3
COAXIAL jack.
3 Connect the video signal and analog audio signals to the VIDEO
3 jacks. ( See "Connection of video components".
in the Dolby Digital (AC-3) format
DIGITAL OUTPUT RF INPUT DIGITAL INPUT DC IN
COAX. AC-3 RF COAX. OPT.
LASER DISC RF DEMODULATOR DEM-9991D
RF
POWER LOCK
OFF OPT. COAX.
SL 16
TEXT
7
Notes on DIGITAL INPUT jacks and connectors
When using digital inputs, perform connection and assignment
taking special care in the relations between the input jacks and
connection cords.
DIGITAL INPUT jack
VIDEO2
VIDEO3
VIDEO4
CD1
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)
AC-3 RF OUT
(COAXIAL)
DIGITAL OUT
(COAXIAL)
DIGITAL OUT
(OPTICAL)
Connection of a DVD player
Use the DIGITAL IN, VIDEO 4 OPTICAL jack for the connec-
tion of a DVD player.
1 Connect the DVD player's DIGITAL OUT (optical)
receiver's DIGITAL IN, VIDEO 4 OPTICAL jack.
2 Connect the video signal, S Video signal and analog audio signals
to the VIDEO 4 jacks. ( See "Connection of video components".
7
)
)
System connections
KRF-V7771D (En/T)
Usable cord connector
COAXIAL connector
COAXIAL connector
OPTICAL connector
OPTICAL connector
LD player with AC-3
RF OUT and DIGITAL
OUT
Note : Connect either optical or co-
axial cord.
Should not be connected both.
Connection of coaxial cord is
used as an example.
DVD player with DIGITAL OUT
Note : Connect either optical or co-
axial cord.
Should not be connected both.
Connection of optical cord is
used as an example.
with the