To Set The Cruise Speed; To Cancel The Cruise Speed; To Resume The Preset Speed; To Reset At A Faster Speed - Hyundai XG300 2001 Owner's Manual

B660B01L-AAT

To Set the Cruise Speed

1. Push in the cruise control main switch. This
turns the system on.
2. Accelerate to desired cruising speed above
25 mph (40 km/h).
3. Push the control switch "SET" (COAST)
position. The "CRUISE" indicator light in the
instrument cluster will illuminate after you
have set the vehicle speed at the desired
speed.
4. Remove your foot from the accelerator pedal
and the desired speed will automatically be
maintained.
5. To increase speed, depress the accelerator
pedal enough for the vehicle to exceed the
preset speed. When you remove your foot
from the accelerator pedal, the vehicle will
return to the speed you have set.
FEATURES OF YOUR HYUNDAI
B660C01L-AAT

To Cancel the Cruise Speed

B660B01L
Do one of the following:
o Push the control switch "CANCEL".
o Depress the brake pedal.
o Shift the selector lever in "N" position.
o Decrease the vehicle speed lower than
memory speed by 9 mph(15 km/h).
o Decrease the vehicle speed approximately
to less than 25 mph(40 km/h).
o Release the main switch.
B660D01L-AAT

To Resume the Preset Speed

B660C01L
The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch "RESUME (ACCEL)" (above 25
mph).
B660E01L-GAT

To Reset at a Faster Speed

1. Push the control switch "RESUME (ACCEL)"
2. Accelerate to desired speed. While the con-
trol switch is held, the vehicle will gradually
gain speed.
B660D01L
1- 49