Air Intake Control Switch With A.q.s; Heating And Cooling System Off - Hyundai XG300 2001 Owner's Manual

B980B01Y-AAT
Fan Speed Control
The fan speed can be set to the desired speed
by pressing the appropriate fan speed control
button. The higher the fan speed is, the more air
is delivered. Pressing the "OFF" button turns off
the fan.
B980E01E-GAT

Air Intake Control Switch With A.Q.S

(If Installed)
This is used to admit fresh outside air or recir-
culate inside air automatically.
: OFF
: ON
Fresh mode :
Air enters the vehicle from the outside and is
heated or cooled according to the function se-
lected.
1- 58
FEATURES OF YOUR HYUNDAI
Recirculation mode :
Air from within the passenger compartment will
be drawn through the heating system and heated
or cooled according to the function selected.
Exhaust gas cutoff mode :
Air enters the vehicle from the outside.
If exhaust gas enters the vehicle from the
outside, the exhaust gas cutoff mode (
is automatically converted to the (
to prevent exhaust gas from entering the ve-
hicle.
NOTE:
It should be noted that prolonged operation
of the heating system in recirculation mode
( ) will give rise to misting of the winds-
hield and side windows and the air within
the passenger compartment will become
stale. In addition, prolonged use of the air
conditioning with the recirculation mode
B980E01L
( ) selected may result in the air within
the passenger compartment becoming ex-
cessively dry.
CAUTION:
If the windows fog up with the Recirculation
or A.Q.S mode selected, set the air intake
control to the Fresh air position or A.Q.S
control to "OFF".
B980D01Y-AAT

Heating and Cooling System Off

Press the "OFF" button to stop the operation of
the heating and cooling system.
B980E02Y-AAT
Air Flow Control
This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or wind-
)
shield. Four symbols are used to represent
) mode,
Face, Bi-Level, Floor and Floor-Defrost air po-
sition.
Face-Level
When selecting the "Face" mode, the indicator
light will come on, causing air to be discharged
through the face level vents.
Bi-Level
When selecting the "Bi-Level" mode, the indica-
tor light will come on and the air will be dis-
charged through the face vents and the floor
vents. This makes it possible to have cooler air
from the dashboard vents and warmer air from
the floor outlets at the same time.
Floor-Level
When selecting the "Floor-Level" mode, the
indicator light will come on and the air will be
discharged through the floor vents.