Combination Turn Signal, Headlight And High-Beam Switch; Front Fog Light Switch; Lane Change Signal; Headlight Switch - Hyundai XG300 2001 Owner's Manual

B360B01Y-GAT

Front Fog Light Switch

To turn on the front fog lights, place the switch
in the "ON" position. They will come on when
the headlight switch is in the first or second
position.
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the turn
signals on the left side of the car to blink.
Pushing upwards on the lever causes the turn
signals on the right side of the car to blink. As
the turn is completed, the lever will automati-
cally return to the center position and turn off
the turn signals at the same time. If either turn
signal indicator light blinks more rapidly than
usual, goes on but does not blink, or does not
1- 32
FEATURES OF YOUR HYUNDAI
go on at all, there is a malfunction in the system.
Check for a burned-out fuse or bulb or see your
Hyundai dealer.
B340B01A-AAT

Lane Change Signal

B360B01L
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
The lever will automatically return to the center
position when released.
B340C01L-AAT

Headlight Switch

To operate the headlights, turn the barrel on the
end of the multi-function switch. The first posi-
tion turns on the parking lights, sidelights, tail
lights and instrument panel lights. The second
B340B01L
position turns on the headlights.
Tail(park) light auto cut
If you do not turn the tail light "OFF" after
driving, the tail lights will automatically shut
"OFF" when the driver's door is opened. To turn
them "ON" again, you must turn the headlight
switch to "OFF" and the "ON" again.
B340C01L