To Set Cruise Control Speed; Cruise Control Switch - Hyundai Verna Owner's Manual

i
I I nformation
• During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will acti-
vate after approximately 3 seconds.
This delay is normal.
• Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
pedal at least once after turning ON
the ignition or starting the vehicle.
n Type A
n Type B

Cruise control switch

CANCEL/O : Cancels cruise control
operation.
CRUISE/ : Turns cruise control
system on or off.
RES+: Resumes or increases cruise
control speed.
SET-: Sets or decreases cruise con-
trol speed.

To set Cruise Control speed

OHCI057022
1. Press the CRUISE/
the steering wheel to turn the sys-
tem on. The CRUISE/
will illuminate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
i
Information
For manual transmission vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
n Type A
n Type B
OHCI057023
button on
indicator
- Manual transmis-
sion