Using A Child Restraint System; Installing A Child Restraint Seat; Installation On Rear Seats - Hyundai XG300 2001 Owner's Manual

o Never use an infant carrier or a child
safety seat that "hooks" over a seatback;
it may not provide adequate security in
an accident.
o Never allow a child to be held in a per-
son's arms while they are in a moving
vehicle, as this could result in serious
injury to the child in the event of an
accident or a sudden stop. Holding a
child in a moving vehicle does not pro-
vide the child with any means of protec-
tion during an accident, even if the per-
son holding the child is wearing a seat
belt.
B230B01E-GAT

Using a Child Restraint System

Cover, Child Restraint
Hook Holder
Bolt, Holder (5/16"-30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer, Hook Holder Cover
Spacer, Child Restraint Hook
Holder
Retainer Washer
For small children and babies, the use of a child
seat or infant seat is strongly recommended.
This child seat or infant seat should be of
appropriate size for the child and should be
1- 18
FEATURES OF YOUR HYUNDAI
installed in accordance with the manufacturer's
instructions. It is further recommended that the
seat be placed in the vehicle's rear seat since
this can make an important contribution to safety.
Your vehicle is provided with three child re-
straint hook holders for installing the child seat
or infant seat.
B230C02Y-AAT

Installing a child Restraint seat

Rear seat package tray
Tether Strap Hook
B230B01Y
Front of Vehicle
Three child restraint hook holders are located
on the rear seat package tray. To install the
child restraint seat, connect the child restraint
tether strap hook to the child restraint hook
holder and tighten to secure the seat.
B230G01Y-AAT

Installation on Rear Seats

Anchorage
To install a child restraint system in the rear
seats, extend the shoulder/lap belt entirely from
its retractor until a "click" is felt. This will engage
the seat belt retractor automatic locking feature,
which allows the seat belt to retract but not
extend. Install the child restraint system, buckle
the seat belt and allow the seat belt to take up
any slack. Make sure that the lap portion of the
belt is tight around the child restraint system
and the shoulder portion of the belt is positioned
so that it can not interfere with the child's head
or neck. Also, double check to be sure that the
B230C01Y
B230G01L